-
Multi-color high temperature resistant glass fiber cloth glass fiber dyed fire insulation cloth
Dyeing cloth, grey cloth (woven cloth, knitted cloth, etc.) through professional dyeing equipment: packing. Sewing head. Singeing, desizing oxygen bleaching, mercerizing, shaping. Dyeing. The finished cloth produced by post-finishing, pre-shrinking and shaping technology is dyed cloth.
-
High temperature and fire resistant cloth for smoke hanging wall
Smoke baffle hanging wall cloth is generally made of fireproof silicone cloth. It is a fixed or active smoke baffle facility that sags no less than 500 mm from the ceiling. It is mainly used in high-rise or super high-rise shopping malls, office buildings, factories, warehouses and other occasions. When the fire control center sends out the fire alarm signal or smoke sensing signal, the flexible smoke baffle hanging wall placed above the ceiling will quickly drop to the set height, forming smoke separation, which can effectively prevent the smoke from flowing horizontally under the building ceiling, and then the smoke exhaust fan will exhaust the high temperature smoke outdoors, which can improve the smoke exhaust effect in the smoke control zone.
-
Soft polyurethane high temperature and fire retardant cloth
PU cloth is polyurethane, mainly made of high elastic fiber composite, with similar characteristics to real leather, pu fabric grid is cheaper, high utilization rate. Due to the overall light material of pu cloth, it can be very good waterproof damage prevention, and its water absorption effect is particularly good. After absorbing water, there will be no swelling or deformation. At the same time, it is particularly easy to take care of. As a leather, the smell is relatively light and the price is relatively affordable.
-
Bulked yarn high temperature resistant high strength glass fiber cloth
The bulk covered aluminum foil cloth is composed of aluminum foil conductive cloth and thermal sol. Selection of special flame retardant adhesive composite form dense film, aluminum foil after composite surface smooth and flat, high light reflectance, vertical and horizontal tensile strength, breathable, impervious to water, good sealing performance. It has the characteristics of high shelter rate, strong material toughness and low price.
-
PTFE coated glass fabric
We use best imported fiberglassas the weaving material to plainknit or specially knit into superiorfiberglass basic cloth, coat it withfine PTFE resin then make it intovarious PTFE high temperatureresistance cloth in differentthickness and widths.
-
Glass fiber yarn
Raw materials through high temperature melting, drawing, winding, weaving and other processes. Finally, various kinds of products are formed. The diameter of glass fiber monofilaments is from several microns to more than twenty meters microns, which is equivalent to 1/20-1/5 of a hair. Each bundle of fiber filament is composed of hundreds or even thousands of monofilaments, which are usually used as reinforcing materials in composite materials, electrical insulation materials and thermal insulation materials, and electric subgrade board, etc. Widely used in various fields of national economy.
-
PVC coated glass fiber cloth
Polyvinyl chloride (PVC) coated cloth with glass fiber cloth, cotton cloth, chemical fiber cloth as the base cloth, coated with special technology, the main performance characteristics: waterproof, flame retardant, mildew proof, cold proof, corrosion proof (referred to as the three anti cloth, five anti cloth); Aging resistance; Uv protection; Easy to clean; High temperature resistance (180 degrees >, good insulation characteristics.
-
Glass dyed cloth
1. Glass fiber cloth is usually used as a composite material to improve materials, electrical insulation materials and thermal insulation materials, electric subgrade board and other social and economic fields.
2, Glass fiber cloth is mainly used in hand paste forming process, glass fiber cloth is mainly used in ship hull, storage tank, glass steel cooling tower, ships, vehicles, tank and so on.
3, Glass fiber cloth is widely used in wall improvement, external wall insulation, external wall waterproof and other aspects, can also be used in cement, plastic, leaching, natural marble, Mosaic and other wall material improvement, is the ideal engineering material in the construction industry.
-
PTFE (glass fiber) membrane
The fabric base material of PTFE membrane is glass fiber, the diameter of the fiber should be in the range of 3.30 ~ 4.05μm, the weight should be greater than 150g/m.
-
Grey cloth
Grey cloth refers to the natural cotton cloth used for printing and dyeing processing. Industrial grey cloth generally refers to cloth, or laminated grey cloth, on the glue of the grey cloth.
Industrial grey cloth generally refers to cloth, or laminated grey cloth, on the glue of the grey cloth.
-
Silicone titanium soft connection fireproof cloth
Silicon titanium fireproof cloth is a kind of high temperature resistant inorganic fiber, is used alkali free glass fiber cloth, its silica (SiO2) content is higher than 96%, the softening point is close to 1700℃, can be used at 900℃ for a long time, can work at 1450℃ for 10 minutes, at 1600℃ for 15 seconds still maintain good condition.
-
Thermal insulation ceramic fiber vermiculite fireproof cloth
After the treatment of vermiculite dispersion, the glass fiber can withstand the burning of high temperature flame for a long time. The high temperature resistant fiber cloth in the temperature of 900 alcohol blowtorch burning, 10 minutes later there is still no hole, and ordinary glass fiber cloth 10 minutes is burned through. After vermiculite coating, its wear resistance is also significantly improved, long-term temperature resistance can reach 800C. Therefore, the coated fabric can be made into high-temperature protective clothing and gloves and used in high-temperature operations such as fire fighting, steel and shipbuilding industries.
